root/autogen.sh

Revision 6b99e84d72c5dff024065c6b0febaa4b8a22efbf, 10.9 kB (checked in by Hans Petter Jansson <hpj@kzerza.amok>, 10 years ago)

Initial commit

  • Property mode set to 100755
Line 
1 #!/bin/sh
2 # Run this to generate all the initial makefiles, etc.
3
4 PKG_NAME=flux
5
6 # name of package
7 PKG_NAME=${PKG_NAME:-Package}
8 srcdir=${srcdir:-.}
9
10 # Local macros
11 ACLOCAL_PATH=$ACLOCAL_PATH:./macros
12 ACLOCAL_FLAGS="-I macros"
13
14 # default version requirements ...
15 REQUIRED_AUTOCONF_VERSION=${REQUIRED_AUTOCONF_VERSION:-2.53}
16 REQUIRED_AUTOMAKE_VERSION=${REQUIRED_AUTOMAKE_VERSION:-1.7}
17 REQUIRED_LIBTOOL_VERSION=${REQUIRED_LIBTOOL_VERSION:-1.4.3}
18 REQUIRED_GETTEXT_VERSION=${REQUIRED_GETTEXT_VERSION:-0.10.40}
19 REQUIRED_GLIB_GETTEXT_VERSION=${REQUIRED_GLIB_GETTEXT_VERSION:-2.2.0}
20 REQUIRED_INTLTOOL_VERSION=${REQUIRED_INTLTOOL_VERSION:-0.25}
21 REQUIRED_PKG_CONFIG_VERSION=${REQUIRED_PKG_CONFIG_VERSION:-0.14.0}
22 REQUIRED_GTK_DOC_VERSION=${REQUIRED_GTK_DOC_VERSION:-1.0}
23 REQUIRED_DOC_COMMON_VERSION=${REQUIRED_DOC_COMMON_VERSION:-2.3.0}
24
25 # a list of required m4 macros.  Package can set an initial value
26 REQUIRED_M4MACROS=${REQUIRED_M4MACROS:-}
27 FORBIDDEN_M4MACROS=${FORBIDDEN_M4MACROS:-}
28
29 # Not all echo versions allow -n, so we check what is possible. This test is
30 # based on the one in autoconf.
31 case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
32   *c*,-n*) ECHO_N= ;;
33   *c*,*  ) ECHO_N=-n ;;
34   *)       ECHO_N= ;;
35 esac
36
37 # some terminal codes ...
38 boldface="`tput bold 2>/dev/null`"
39 normal="`tput sgr0 2>/dev/null`"
40 printbold() {
41     echo $ECHO_N "$boldface"
42     echo "$@"
43     echo $ECHO_N "$normal"
44 }    
45 printerr() {
46     echo "$@" >&2
47 }
48
49 # Usage:
50 #     compare_versions MIN_VERSION ACTUAL_VERSION
51 # returns true if ACTUAL_VERSION >= MIN_VERSION
52 compare_versions() {
53     ch_min_version=$1
54     ch_actual_version=$2
55     ch_status=0
56     IFS="${IFS=         }"; ch_save_IFS="$IFS"; IFS="."
57     set $ch_actual_version
58     for min in $ch_min_version; do
59         ch_cur=`echo $1 | sed 's/[^0-9].*$//'`; shift # remove letter suffixes
60         if [ -z "$ch_min" ]; then break; fi
61         if [ -z "$ch_cur" ]; then ch_status=1; break; fi
62         if [ $ch_cur -gt $ch_min ]; then break; fi
63         if [ $ch_cur -lt $ch_min ]; then ch_status=1; break; fi
64     done
65     IFS="$ch_save_IFS"
66     return $ch_status
67 }
68
69 # Usage:
70 #     version_check PACKAGE VARIABLE CHECKPROGS MIN_VERSION SOURCE
71 # checks to see if the package is available
72 version_check() {
73     vc_package=$1
74     vc_variable=$2
75     vc_checkprogs=$3
76     vc_min_version=$4
77     vc_source=$5
78     vc_status=1
79
80     vc_checkprog=`eval echo "\\$$vc_variable"`
81     if [ -n "$vc_checkprog" ]; then
82         printbold "using $vc_checkprog for $vc_package"
83         return 0
84     fi
85
86     printbold "checking for $vc_package >= $vc_min_version..."
87     for vc_checkprog in $vc_checkprogs; do
88         echo $ECHO_N "  testing $vc_checkprog... "
89         if $vc_checkprog --version < /dev/null > /dev/null 2>&1; then
90             vc_actual_version=`$vc_checkprog --version | head -1 | \
91                                sed 's/^.*[      ]\([0-9.]*[a-z]*\).*$/\1/'`
92             if compare_versions $vc_min_version $vc_actual_version; then
93                 echo "found $vc_actual_version"
94                 # set variable
95                 eval "$vc_variable=$vc_checkprog"
96                 vc_status=0
97                 break
98             else
99                 echo "too old (found version $vc_actual_version)"
100             fi
101         else
102             echo "not found."
103         fi
104     done
105     if [ "$vc_status" != 0 ]; then
106         printerr "***Error***: You must have $vc_package >= $vc_min_version installed"
107         printerr "  to build $PKG_NAME.  Download the appropriate package for"
108         printerr "  from your distribution or get the source tarball at"
109         printerr "    $vc_source"
110         printerr
111     fi
112     return $vc_status
113 }
114
115 # Usage:
116 #     require_m4macro filename.m4
117 # adds filename.m4 to the list of required macros
118 require_m4macro() {
119     case "$REQUIRED_M4MACROS" in
120         $1\ * | *\ $1\ * | *\ $1) ;;
121         *) REQUIRED_M4MACROS="$REQUIRED_M4MACROS $1" ;;
122     esac
123 }
124
125 forbid_m4macro() {
126     case "$FORBIDDEN_M4MACROS" in
127         $1\ * | *\ $1\ * | *\ $1) ;;
128         *) FORBIDDEN_M4MACROS="$FORBIDDEN_M4MACROS $1" ;;
129     esac
130 }
131
132 # Usage:
133 #     check_m4macros
134 # Checks that all the requested macro files are in the aclocal macro path
135 # Uses REQUIRED_M4MACROS and ACLOCAL variables.
136 check_m4macros() {
137     # construct list of macro directories
138     cm_macrodirs="`$ACLOCAL --print-ac-dir`"
139     set - $ACLOCAL_FLAGS
140     while [ $# -gt 0 ]; do
141         if [ "$1" = "-I" ]; then
142             cm_macrodirs="$cm_macrodirs $2"
143             shift
144         fi
145         shift
146     done
147
148     cm_status=0
149     if [ -n "$REQUIRED_M4MACROS" ]; then
150         printbold "Checking for required M4 macros..."
151         # check that each macro file is in one of the macro dirs
152         for cm_macro in $REQUIRED_M4MACROS; do
153             cm_macrofound=false
154             for cm_dir in $cm_macrodirs; do
155                 if [ -f "$cm_dir/$cm_macro" ]; then
156                     cm_macrofound=true
157                     break
158                 fi
159                 # The macro dir in Cygwin environments may contain a file
160                 # called dirlist containing other directories to look in.
161                 if [ -f "$cm_dir/dirlist" ]; then
162                     for cm_otherdir in `cat $cm_dir/dirlist`; do
163                         if [ -f "$cm_otherdir/$cm_macro" ]; then
164                             cm_macrofound=true
165                             break
166                         fi
167                     done
168                 fi
169             done
170             if $cm_macrofound; then
171                 :
172             else
173                 printerr "  $cm_macro not found"
174                 cm_status=1
175             fi
176         done
177     fi
178     if [ -n "$FORBIDDEN_M4MACROS" ]; then
179         printbold "Checking for forbidden M4 macros..."
180         # check that each macro file is in one of the macro dirs
181         for cm_macro in $FORBIDDEN_M4MACROS; do
182             cm_macrofound=false
183             for cm_dir in $cm_macrodirs; do
184                 if [ -f "$cm_dir/$cm_macro" ]; then
185                     cm_macrofound=true
186                     break
187                 fi
188             done
189             if $cm_macrofound; then
190                 printerr "  $cm_macro found (should be cleared from macros dir)"
191                 cm_status=1
192             fi
193         done
194     fi
195     if [ "$cm_status" != 0 ]; then
196         printerr "***Error***: some autoconf macros required to build $PKG_NAME"
197         printerr "  were not found in your aclocal path, or some forbidden"
198         printerr "  macros were found.  Perhaps you need to adjust your"
199         printerr "  ACLOCAL_PATH?"
200         printerr
201     fi
202     return $cm_status
203 }
204
205 want_libtool=false
206 want_gettext=false
207 want_glib_gettext=false
208 want_intltool=false
209 want_pkg_config=false
210 want_gtk_doc=false
211
212 configure_files="`find $srcdir -name '{arch}' -prune -o -name configure.ac -print -or -name configure.in -print`"
213 for configure_ac in $configure_files; do
214     if grep "^A[CM]_PROG_LIBTOOL" $configure_ac >/dev/null; then
215         want_libtool=true
216     fi
217     if grep "^AM_GNU_GETTEXT" $configure_ac >/dev/null; then
218         want_gettext=true
219     fi
220     if grep "^AM_GLIB_GNU_GETTEXT" $configure_ac >/dev/null; then
221         want_glib_gettext=true
222     fi
223     if grep "^AC_PROG_INTLTOOL" $configure_ac >/dev/null; then
224         want_intltool=true
225     fi
226     if grep "^PKG_CHECK_MODULES" $configure_ac >/dev/null; then
227         want_pkg_config=true
228     fi
229     if grep "^GTK_DOC_CHECK" $configure_ac >/dev/null; then
230         want_gtk_doc=true
231     fi
232 done
233
234 DIE=0
235
236 #tell Mandrake autoconf wrapper we want autoconf 2.5x, not 2.13
237 WANT_AUTOCONF_2_5=1
238 export WANT_AUTOCONF_2_5
239 version_check autoconf AUTOCONF 'autoconf2.50 autoconf autoconf-2.53' $REQUIRED_AUTOCONF_VERSION \
240     "http://ftp.gnu.org/pub/gnu/autoconf/autoconf-$REQUIRED_AUTOCONF_VERSION.tar.gz" || DIE=1
241 AUTOHEADER=`echo $AUTOCONF | sed s/autoconf/autoheader/`
242
243 case $REQUIRED_AUTOMAKE_VERSION in
244     1.4*) automake_progs="automake-1.4 automake" ;;
245     1.5*) automake_progs="automake-1.7 automake-1.6 automake-1.5 automake" ;;
246     1.6*) automake_progs="automake-1.7 automake-1.6 automake" ;;
247     1.7*) automake_progs="automake-1.7 automake" ;;
248 esac
249 version_check automake AUTOMAKE "$automake_progs" $REQUIRED_AUTOMAKE_VERSION \
250     "http://ftp.gnu.org/pub/gnu/automake/automake-$REQUIRED_AUTOMAKE_VERSION.tar.gz" || DIE=1
251 ACLOCAL=`echo $AUTOMAKE | sed s/automake/aclocal/`
252
253 if $want_libtool; then
254     version_check libtool LIBTOOLIZE libtoolize $REQUIRED_LIBTOOL_VERSION \
255         "http://ftp.gnu.org/pub/gnu/libtool/libtool-$REQUIRED_LIBTOOL_VERSION.tar.gz" || DIE=1
256     require_m4macro libtool.m4
257 fi
258
259 if $want_gettext; then
260     version_check gettext GETTEXTIZE gettextize $REQUIRED_GETTEXT_VERSION \
261         "http://ftp.gnu.org/pub/gnu/gettext/gettext-$REQUIRED_GETTEXT_VERSION.tar.gz" || DIE=1
262     require_m4macro gettext.m4
263 fi
264
265 if $want_glib_gettext; then
266     version_check glib-gettext GLIB_GETTEXTIZE glib-gettextize $REQUIRED_GLIB_GETTEXT_VERSION \
267         "ftp://ftp.gtk.org/pub/gtk/v2.2/glib-$REQUIRED_GLIB_GETTEXT_VERSION.tar.gz" || DIE=1
268     require_m4macro glib-gettext.m4
269 fi
270
271 if $want_intltool; then
272     version_check intltool INTLTOOLIZE intltoolize $REQUIRED_INTLTOOL_VERSION \
273         "http://ftp.gnome.org/pub/GNOME/sources/intltool/" || DIE=1
274     require_m4macro intltool.m4
275 fi
276
277 if $want_pkg_config; then
278     version_check pkg-config PKG_CONFIG pkg-config $REQUIRED_PKG_CONFIG_VERSION \
279         "'http://www.freedesktop.org/software/pkgconfig/releases/pkgconfig-$REQUIRED_PKG_CONFIG_VERSION.tar.gz" || DIE=1
280     require_m4macro pkg.m4
281 fi
282
283 if $want_gtk_doc; then
284     version_check gtk-doc GTKDOCIZE gtkdocize $REQUIRED_GTK_DOC_VERSION \
285         "http://ftp.gnome.org/pub/GNOME/sources/gtk-doc/" || DIE=1
286     require_m4macro gtk-doc.m4
287 fi
288
289 check_m4macros || DIE=1
290
291 if [ "$DIE" -eq 1 ]; then
292   exit 1
293 fi
294
295 if test -z "$*"; then
296   printerr "**Warning**: I am going to run \`configure' with no arguments."
297   printerr "If you wish to pass any to it, please specify them on the"
298   printerr \`$0\'" command line."
299   printerr
300 fi
301
302 topdir=`pwd`
303 for configure_ac in $configure_files; do
304     dirname=`dirname $configure_ac`
305     basename=`basename $configure_ac`
306     if test -f $dirname/NO-AUTO-GEN; then
307         echo skipping $dirname -- flagged as no auto-gen
308     else
309         printbold "Processing $configure_ac"
310         cd $dirname
311
312         aclocalinclude="$ACLOCAL_FLAGS"
313         printbold "Running $ACLOCAL..."
314         $ACLOCAL $aclocalinclude || exit 1
315
316         if grep "^A[CM]_PROG_LIBTOOL" $basename >/dev/null; then
317             printbold "Running $LIBTOOLIZE..."
318             $LIBTOOLIZE --force || exit 1
319         fi
320         if grep "^AM_GLIB_GNU_GETTEXT" $basename >/dev/null; then
321             printbold "Running $GLIB_GETTEXTIZE... Ignore non-fatal messages."
322             echo "no" | $GLIB_GETTEXTIZE --force --copy || exit 1
323         elif grep "^AM_GNU_GETTEXT" $basename >/dev/null; then
324            if grep "^AM_GNU_GETTEXT_VERSION" $basename > /dev/null; then
325                 printbold "Running autopoint..."
326                 autopoint --force || exit 1
327            else
328                 printbold "Running $GETTEXTIZE... Ignore non-fatal messages."
329                 echo "no" | $GETTEXTIZE --force --copy || exit 1
330            fi
331         fi
332         if grep "^AC_PROG_INTLTOOL" $basename >/dev/null; then
333             printbold "Running $INTLTOOLIZE..."
334             $INTLTOOLIZE --force --automake || exit 1
335         fi
336         if grep "^GTK_DOC_CHECK" $basename >/dev/null; then
337             printbold "Running $GTKDOCIZE..."
338             touch gtk-doc.make
339             $GTKDOCIZE || exit 1
340         fi
341         if grep "^A[CM]_CONFIG_HEADER" $basename >/dev/null; then
342             printbold "Running $AUTOHEADER..."
343             $AUTOHEADER || exit 1
344         fi
345
346         printbold "Running $AUTOMAKE..."
347         $AUTOMAKE --gnu --add-missing || exit 1
348
349         printbold "Running $AUTOCONF..."
350         $AUTOCONF || exit 1
351
352         cd $topdir
353     fi
354 done
355
356 conf_flags="--enable-maintainer-mode"
357
358 if test x$NOCONFIGURE = x; then
359     printbold Running $srcdir/configure $conf_flags "$@" ...
360     $srcdir/configure $conf_flags "$@" \
361         && echo Now type \`make\' to compile $PKG_NAME || exit 1
362 else
363     echo Skipping configure process.
364 fi
Note: See TracBrowser for help on using the browser.